Bolt: steel, grade 8.8/ hot dip galvanized
Grooved nut: steel/ hot dip galvanized
Cotter pin: stainless steel; A2 or copper
Connecting bolts are required as a connecting element to create a clevis and tongue coupling.
The design of the bolt head and the shape of the grooved nut are largely optional in this DIN standard.
These dimensions are therefore specified by RIBE in works standards (WN and HAWN).
The connecting bolts are hot-dip galvanized.
The split pin used to secure the grooved nut at RIBE is made of anstenitic stainless steel and soft annealed to facilitate installation.
The split pin is only slightly bent open when the connecting bolt kits are delivered to ensure that it cannot be lost.
The cotter pin ends must be bent completely into the groove of the grooved nut during final assembly.
Bolt: steel, grade 8.8/ hot dip galvanized
Grooved nut: steel/ hot dip galvanized
Cotter pin: respectively copper/ tin-plated
Connecting bolts are required as a connecting element to create a clevis and tongue coupling.
The design of the bolt head and the shape of the grooved nut are largely optional in this DIN standard.
These dimensions are therefore specified by RIBE in works standards (WN and HAWN).
The connecting bolts are hot-dip galvanized.
The split pin used to secure the grooved nut at RIBE is made of anstenitic stainless steel and soft annealed to facilitate installation.
The split pin is only slightly bent open when the connecting bolt kits are delivered to ensure that it cannot be lost.
The cotter pin ends must be bent completely into the groove of the grooved nut during final assembly.
Bolt: steel, grade 8.8/ hot dip galvanized
Grooved nut: steel/ hot dip galvanized
Cotter pin: stainlees steel A2 respectively copper
Connecting bolts are required as a connecting element to create a clevis and tongue coupling.
The design of the bolt head and the shape of the grooved nut are largely optional in this DIN standard.
These dimensions are therefore specified by RIBE in works standards (WN and HAWN).
The connecting bolts are hot-dip galvanized.
The split pin used to secure the grooved nut at RIBE is made of anstenitic stainless steel and soft annealed to facilitate installation.
The split pin is only slightly bent open when the connecting bolt kits are delivered to ensure that it cannot be lost.
The cotter pin ends must be bent completely into the groove of the grooved nut during final assembly.
Bolt: steel, grade 8.8/ hot dip galvanized
Grooved nut: steel/ hot dip galvanized
Cotter pin: stainlees steel A2 respectively copper
Connecting bolts are required as a connecting element to create a clevis and tongue coupling.
The design of the bolt head and the shape of the grooved nut are largely optional in this DIN standard.
These dimensions are therefore specified by RIBE in works standards (WN and HAWN).
The connecting bolts are hot-dip galvanized.
The split pin used to secure the grooved nut at RIBE is made of anstenitic stainless steel and soft annealed to facilitate installation.
The split pin is only slightly bent open when the connecting bolt kits are delivered to ensure that it cannot be lost.
The cotter pin ends must be bent completely into the groove of the grooved nut during final assembly.
Bolt: steel, grade 8.8/ hot dip galvanized
Grooved nut: steel/ hot dip galvanized
Cotter pin: stainlees steel A2 respectively copper
Connecting bolts are required as a connecting element to create a clevis and tongue coupling.
The design of the bolt head and the shape of the grooved nut are largely optional in this DIN standard.
These dimensions are therefore specified by RIBE in works standards (WN and HAWN).
The connecting bolts are hot-dip galvanized.
The split pin used to secure the grooved nut at RIBE is made of anstenitic stainless steel and soft annealed to facilitate installation.
The split pin is only slightly bent open when the connecting bolt kits are delivered to ensure that it cannot be lost.
The cotter pin ends must be bent completely into the groove of the grooved nut during final assembly.
Bolt: steel, grade 8.8/ hot dip galvanized (according to company standard HAWN 3581)
Grooved nut: steel/ hot dip galvanized (according to company standard HAWN 3320)
Cotter pin: copper/ tin plated
Connecting bolts are required as a connecting element to create a clevis and tongue coupling.
The design of the bolt head and the shape of the grooved nut are largely optional in this DIN standard.
These dimensions are therefore specified by RIBE in works standards (WN and HAWN).
The connecting bolts are hot-dip galvanized.
The split pin used to secure the grooved nut at RIBE is made of anstenitic stainless steel and soft annealed to facilitate installation.
The split pin is only slightly bent open when the connecting bolt kits are delivered to ensure that it cannot be lost.
The cotter pin ends must be bent completely into the groove of the grooved nut during final assembly.
Bolt: steel, grade 8.8/ hot dip galvanized
Grooved nut: steel/ hot dip galvanized
Cotter pin: stainlees steel A2 respectively copper
Connecting bolts are required as a connecting element to create a clevis and tongue coupling.
The design of the bolt head and the shape of the grooved nut are largely optional in this DIN standard.
These dimensions are therefore specified by RIBE in works standards (WN and HAWN).
The connecting bolts are hot-dip galvanized.
The split pin used to secure the grooved nut at RIBE is made of anstenitic stainless steel and soft annealed to facilitate installation.
The split pin is only slightly bent open when the connecting bolt kits are delivered to ensure that it cannot be lost.
The cotter pin ends must be bent completely into the groove of the grooved nut during final assembly.